29-Inch

- For Downhill and Enduro - Long-supported brake edges - Extra strong shoulder knobs - Good self-cleaning properties - Available in Super Downhill, Super Gravity and BikePark construction - Available in Addix Ultra Soft, Addix Soft and Addix Performance compounds

- This XC Rocket combines speed and corner control at the highest possible level. - An excellent all-rounder for racetracks. - Tread design: balanced proportion between stable studs and sufficient gaps for excellent rolling characteristics and amazing self-cleaning properties. - 27.5+ versions with additional stud rows.

When you’re out on a ride the last thing you want is to be limited by your tires in any way. Our ExtraTerrestrial Tires were designed to let you ride without limits by simply following the only tenets we have for tire design: they’re high volume and they kick ass. The ExtraTerrestrial tire was meant to serve as a heavy-duty off-road touring tire that shines on hardpack surfaces. It uses a nylon breaker in the sidewalls for cut protection, a molded pattern for anti-cut propagation, and a Kevlar cap under the tread to protect against flats. The ET Tire uses a distinctly directional tread pattern and its width yields more traction than you might expect from a tire with such little rolling resistance. The tread is low profile with a file tread in between tread blocks. The ExtraTerrestrial tire has enough width and traction for the soft stuff and won’t bog you down on smooth or hard surfaces. - Folding bead - Casing: 60 TPI

High-volume casing, low-profile tread - Aggressive side knobs - Dual Compound - Lightweight XC race tire - Race-inspired low profile design Maxxis has done it again with its latest XC race tire. The new Maxxis Aspen pushes the limits of a lightweight XC tire designed to have minimal rolling resistance. The Aspen is designed with a high-volume casing to smooth out the roughest roots and rocks, while the dual compounds give optimal traction in the corners. So, if crossing the finish line first is your top priority, then the Aspen was designed for you.

A semi-slick with dependable Minion cornering capabilities - Semi-slick center with Minion side knobs - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims The Minion SS fills the gap between a fast-rolling XC tire and a grippy DH tire by including a cluster of short, ramped knobs flanked by the much-loved Minion side knobs. This combination creates a fast-rolling tire with a square profile that hooks up in loose terrain. Perfect for summer shredding.

The Kwick Nine is a mega sized 29'er tire that gives you all the big wheeled fun of a 29'er and brings it to the streets. The smooth tread design lets you take your big mountain rig and travel effortlessly through the city. The Kwick Nine 29'er also features K-Shield (KS) flat protection for worry free urban adventures. So, wrap that mountain steed with a set of Kwick Nine 29'ers and explore the urban landscape. - Premium Trekking, Comfort, or Commuting tire - Front and Rear application - K-Shield (KS) is a layer of light, flexible rubber containing aramid and ceramic particles inside the tire under the tread area only. Designed to prevent punctures and increase tire life - Reflective stripe on sidewalls for added safety

The Saber Pro is the first in a new generation of cross country tires from Kenda. The heart of this new race bred tire is the R3C rubber compound which allows for very low rolling resistance, excellent grip, and a lightweight low profile tread design. The Saber Pro has a high volume casing to absorb the course while a low uniform tread profile offers minimal rolling resistance. With edge knobs that are larger and hooked to give you maximum traction in the corners, the Saber Pro is designed to do one thing, win races. - R3C racing compound

Ranger is designed to be a set-it-and-forget-it tire. Tightly spaced center knobs set the pace, while open outer lugs devour corners and shed muck with ease, making the Ranger equal parts trail ace and XC dominator. Completing the package, multi-directional siping ensures the Ranger grabs hold, whether tackling technical climbs or flying into corners. The lean profile of the Ranger 2.0/2.25 provides optimal efficiency for XC racing, while the high-volume, openly-spaced Ranger 2.40 was created with trail riding in mind. Ranger outperforms in all conditions, without compromising along the way. - Multidirectional siping provides increased traction whether accelerating, braking, or cornering - Well-spaced lugs clear out quickly in wet conditions - Lightweight, rounded casing conserves energy and feels quick to respond

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Unwavering traction in every corner of the world, Vigilante is our premier aggressive trail and enduro tire. It grips at lean angles like nobody's business, and is the tire of choice for our entire team of ripping enduro athletes who need a tire that won't let them down while chasing podiums. - Prominent lugs dig into any terrain, wet or dry, while providing stability at any speed. - Ample spacing between knobs ensures it flings mud while biting into loose, chunky trails. - Often used as an aggressive front tire, though it also works well as a rear tire on loose, steep terrain. - Proven performance as WTB's most popular mountain tire.

This versatile competition and trail tire is comfortable and sure-footed in the turns. It has good grip and is available with various technologies. - Smoothly rolling tire that adapts to any terrain with its special tread - Suitable for E-Bikes

The e-bike version of the new Vittoria Mazza raises the bar on e-Enduro performance for mixed terrain! Starting with a defined center tread, the e-Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift. The stepped leading edge rolls like a ramp but digs in on climbs, making e-Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction while also accelerating mud clearing. Cornering on the e-Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. The tire's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe-width pattern provides tactile grip at the knob surface without sacrificing speed or grip - Graphene 2.0 compound reduces rolling resistance, increasing range and battery life

e-Martello hammers home the performance you expect, while extending your ride. Looking for the one tire to tackle a wide range of courses? This is the ticket. e-Martello features a 4C Graphene compound combined with a moto-inspired tread design and progressive width siping. This design provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that riders expect. Whether shredding rocks, roots, or mixed terrain, e-Martello delivers.

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

Whether in Gravel or Cyclocross, one thing is for certain-course conditions are constantly changing. When you roll up to the start line, be confident knowing that you have the performance advantage of the Terreno Mix all conditions tread, no matter the terrain. At the heart of the design is a fast rolling center ridge, which is designed to minimize rolling resistance, while still providing confident braking traction. Cornering and off camber work is confidently handled by alternating open shoulder lugs. These lugs are shaped to allow a supple feel for pavement and hardpack surfaces, while still offering a solid effective edge for grass and loam terrain. The exclusive 3C Graphene compound structure places 3 unique compounds where you need them most, adding to the performance. - Exclusive 3C compound construction featuring Graphene compound technology - Fast rolling center-ridge design - Open shoulder lugs for secure off-camber traction - Traditional tread profile, for smooth transitions, across varied terrain

Riding technical XC on your e-bike? The e-Barzo is your choice for traction and range. How can such an aggressive XC tire roll so fast? The magic starts in the center tread, where we place an alternating ridge design and progressive sipe angles. Cornering duties are handled by the moto-style block knobs, laid out in a proven V-formation. The result is a tire that corners as fast as it rolls while still offering the protection of a full-depth tread. Rocks and roots? Check. World Championship? Check. - Aggressive XC tread for the most technical terrain - Medium spaced knobs for a range of terrain and conditions - Graphene 2.0 compound reduces rolling resistance, increasing range and battery life

- RaceGuard protection with a double layer of Nylon fabric under thetread - Endurance compound rubber for the highest durability - E-bike ready—suitable for speeds up to 50kph

- Aggressive Riding in Loose and Soft Terrain - Tall profile and widely spaced tread for aggressive riding styles on any kind of loose and soft terrain, whether for dry or muddy conditions due to the SmartGRIP Compound. - The best choice when cornering speed in demanding terrains is fundamental, all with a high level of reliability for a longer lifespan.

- Rear Specific Performance for Mixed Terrain -The R model is our rear specific design: added traction on either pedaling and braking durability without compromising performance over a mixed variety of terrain, maximized for both dry or wet conditions due to the SmartGRIP Compound. - All with a high level of reliability for a longer lifespan: the best combo with an M on front for a balanced riding style.

- Smooth rolling center pattern with larger lugs on shoulders for corner traction and a square profile - ISO: 622 - Bead: Wire - TPI: 27

- Developed with Aaron Gwin - Kenda's all new dry condition moutain bike tire - Shines with excellent cornering predictability and particularly high puncture protection - 40% higher puncture protection than the current market leading tire

Panaracer Romero High Output tire utilizes a triple compound and our Anti-Flat Plus technology that combines bead-to-bead protection with a rubber belt for added protection at low pressure. - 120 TPI XC/Enduro model utilizes a dual compound under the sidewall protection

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The DriverPro was designed with one goal in mind: to be the lightest, fastest, multi-condition tire available. The DriverPro has a slightly round profile with specially placed multi-height knobs and tread that provide super-fast straightaway speed. - Black MTB tread - Black with black sidewall - 30-55 PSI - Weight of only 580-590 grams - Tubeless Compatible - ASB Anti Snake Bite - ZSG Natural Compound

Smart Sam goes well on any terrain and even on the road it rolls effortlessly. It will roll over just about anything in the Double Defense version.

- Tire Diameter/ISO: 27.5''/584 - Tire Width: 2.6 - Tire Weight: 950g - Tire Compound: SmartGRIP Gravity - Tire Technology: Hyperwall - Tire Type: Tubeless Ready - Tire Width Range: 2.30 - 2.60 - Labeled Size: 275x2.60 - e-Bike approved: Yes

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

Kryptotal Rear tire is optimized for the rear wheel; this all around tire balances stability of grip, traction for braking and rolling resistance. Ideal for mixed terrain conditions for you to push your limits in trail, enduro or downhill gravity riding. - Carcass construction is robust and impervious against damage and penetration from foreign objects, resulting in a versatile, low weight and an attractive design - Pair with Kryptol Front tire for optimum use - Durable single ply carcass construction with reinforcement. Balance between weight and robustness - Soft-Compound offers a balance of grip and rolling resistance for gravity focused use cases. A high level of grip with a reasonable rolling resistance for optimized rolling properties Enduro or Trail riding - E25 e-bike rating features a high quality structure with puncture protection to reduce premature wear brought about by the additional driving force